Material: Resin

Size: 85.00x74.00x10.00mm/3.35x2.91x0.39inch

DIY Diamond Mosaic production steps:
1. Open the box, check the Diamond Mosaic special tools
2. Check the colour of resin diamonds, according to the order of coding
3. Uncover the tape picture above, you will see many symbols corresponding to the colour code
4. According to the corresponding colour code jig corresponding resin diamonds inlay
5. It is recommended that a set of resin diamonds be completed more quickly
6. In order to make a perfect Diamond Mosaic, put the drawing in one place and do not have to leave diamonds in each line of symbols
7. To cut a good shape on the drawing, please mount the sorting array on the flat surface of the material above
8. Piecing needs to be flat, neat and without cracks
9. After a good scrabble, the rest of the glue gap conforms to the diamond symbols
10. To complete a good diamond drawing, please put it into a suitable frame of your choice (frame is not provided with this product)
Attention:
This is DIY diamond drawing, not finished, you need to finish it by yourself.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.